NOTE When shooting under lights, your shutter can affect the visibility of flicker.
Your Blackmagic Pocket Cinema Camera will automatically calculate a flicker free
shutter value for your current frame rate. It will display up to three suggested flicker
free shutter options at the bottom of the touchscreen display when adjusting your
shutter. These shutter values are affected by mains power frequency in your region.
You can set your local power frequency to 50Hz or 60Hz in the camera's setup menu.
See the 'setup settings' section in this manual for more information.
Tapping the 'shutter' indicator brings up the suggested shutter values along the bottom of the
touch screen. If you have auto exposure set to 'off,' this screen will show you your currently
selected shutter value, as well as the available flicker free shutter values, based on the mains
power frequency you have selected in your camera's setup menu. For more information, see
the 'setup settings' section in this manual.
It's worth mentioning the characteristics of individual light sources may still cause flicker even
when using flicker free values. We recommend always performing a test shoot when not using
continuous lights.
To select one of the flicker free shutter values, simply tap on one of the displayed shutter
values. Using the arrows on either side of the current shutter value indicator, will cycle through
some of the most commonly used values.
Your camera will suggest flicker free shutter values based on the mains
power frequency you choose in the 'setup' menu
If you are shooting outside, or using flicker free lights, you can also manually select a shutter
value by double tapping the current shutter indicator at the bottom left of your screen. When
shutter angle is selected, this will bring up a keypad which you can use to set any shutter angle
between 5 and 360 degrees.
Use the manual shutter keypad to enter your shutter timing of choice when
shooting outdoors or under flicker free lights
Your Blackmagic Pocket Cinema Camera has three shutter based auto exposure modes.
To select one of these, tap the 'auto exposure' button in the far right of the shutter menu.
Touchscreen Controls
49