File Naming Convention; Monitor Settings - Blackmagic Design Pocket Cinema Camera Manuel D'installation Et D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

File Naming Convention

Clips are recorded to your CFast card, or SD card or USB-C flash disk in the Blackmagic RAW
format or to a ProRes QuickTime movie, depending upon which recording format you
have chosen.
The table below shows an example of the file naming convention:
A001_08151512_C001.mov
A001_08151512_C001.mov
A001_08151512_C001.mov
A001_08151512_C001.mov
A001_08151512_C001.mov
A001_08151512_C001.mov
A001_08151512_C001.mov
A001_08151512_C001.mov
Still image files captured using the still button follow the file naming convention for video clips,
however the filename has 'S001' representing the 'still number' as the last four characters of the
filename in place of the clip number. For information on how to change the camera index, see
the 'Project Metadata' section.

Monitor Settings

The 'monitor' tab lets you adjust status text, overlays, and other monitoring options for your
Blackmagic Pocket Cinema Camera's LCD touchscreen and the HDMI output. Options are
arranged by output between 'LCD', 'HDMI' and 'both', which covers monitor settings that affect
the LCD and the HDMI output. These menus have two pages of options, which you can cycle
through by tapping the arrows at the edge of your camera's touchscreen, or swiping left or right.
If you have the optional viewfinder installed on Blackmagic Pocket Cinema Camera 6K Pro,
settings on the first page of the 'monitor' tab let you control what is displayed on the LCD, HDMI
and viewfinder independently.
If you have Blackmagic Pocket Cinema Camera Pro EVF installed on your camera, the 'monitor'
tab includes a 'viewfinder' button and an 'all' button. The 'all' button replaces the 'both' button
and refers to status text you can display on the LCD touchscreen, HDMI output and the
electronic viewfinder at the same time.
Monitor Settings 1
The first page of the monitor tab contains identical settings for each output. For example, you
can set 'zebra' on for the LCD touchscreen, but off for the HDMI output.
QuickTime Movie Filename
Camera index
Reel Number
Month
Day
Hour
Minute
Clip Number
Settings
67

Publicité

Chapitres

Table des Matières
loading

Table des Matières