Blackmagic Design Pocket Cinema Camera Manuel D'installation Et D'utilisation page 203

Tapping the 'FPS' indicator lets you change your camera's sensor and project frame rates via
a menu at the bottom of the LCD touchscreen.
Project Frame Rate
The project frame rate is the camera's recording format frame rate and provides a selection of
common frame rates used in the film and television industry. This frame rate is normally set to
match your post production workflow.
8 project frame rates are available including 23.98, 24, 25, 29.97, 30, 50, 59.94 and 60 frames
per second.
To adjust your camera's project frame rate while in the 'FPS' menu, tap the left or right arrows
next to the current frame rate at the bottom left of your touchscreen. Alternatively, you can drag
the slider left or right.
Tap the arrows on either side of the project frame
rate or move the slider to make adjustments
TIP Your Blackmagic Pocket Cinema Camera's project frame rate also sets the frame
rate of the HDMI output.
Sensor Frame Rate
The sensor frame rate sets how many actual frames from the sensor are recorded every
second. This frame rate will affect how fast or slow your video will play back at your set project
frame rate.
With 'off speed frame rate' enabled, tap a preset or the arrows on either side
of the sensor frame rate or move the slider to make adjustments
By default, the project and sensor frame rates are matched for a natural playback speed.
However, by tapping the 'off speed frame rate' switch icon in the bottom right hand side of your
camera's 'FPS' menu, you can independently set the sensor frame rate.
Touchscreen Controls 47