Settings; Dashboard; Record Settings 2 - Blackmagic Design Pocket Cinema Camera Manuel D'installation Et D'utilisation

Once shuttling, you can change the shuttle rate by tapping the transport keys again. Each time
you tap the transport key in the same direction you double the shuttle rate. The maximum
shuttle rate is x16 normal speed. Tapping the transport key again at x16 speed returns you
to x2 speed. Each time you tap the opposite direction, the shuttle speed halves until you reach
x2 speed. You can return to normal playback by tapping the 'play' button.
The shuttle speed indicator displays the speed and
direction of footage being fast forwarded or reversed
Tapping the 'record' control button in playback mode returns your camera to standby mode,
ready to record.
Swipe up or down on the touchscreen to hide status text while playing back footage. Enter the
slate in playback mode to mark the current clip 'good take' in metadata. For more information,
see the 'entering metadata' section.

Settings

Dashboard

Press the 'menu' button to open your camera's dashboard. This tabbed menu has settings not
available from the touchscreen. Settings are divided by function into 'record,' 'monitor,' 'audio,'
'setup,' 'presets,' and 'LUTS' tabs. Each tab has multiple pages, which you can cycle through by
tapping the arrows at the edge of your camera's touchscreen, or swiping left or right.
Tap the 'record,' 'monitor,' 'audio,' 'setup,' 'presets,' and 'LUTS' headings
to move between your Pocket Cinema Camera's dashboard tabs
Record Settings
The 'record' tab lets you set your video format, codec, and resolution, as well as other settings
that are important for your recorded video, such as dynamic range and detail sharpening.
Record Settings 1
The first page of the 'record' settings tab contains the following settings.
Settings 61