Setup Settings - Blackmagic Design Pocket Cinema Camera Manuel D'installation Et D'utilisation

XLR Phantom Power
Your camera's XLR input can provide 48V phantom power so you can use microphones that
aren't self powered. When your camera is set to 'XLR' audio input, simply tap the 'phantom
power' switch icon to enable phantom power. Pocket Cinema Camera 6K Pro has two XLR
inputs and separate phantom power switches for each input.
Audio Meters
Select an 'audio meters' standard for the peak level meters.
Audio meter setting
PPM (-20 dBFS)
PPM (-18 dBFS)
NOTE It is standard practice to plug in your XLR cable before switching phantom
power on. It is also important to switch phantom power to 'off' when you no longer
have a phantom powered microphone connected. Connecting equipment that doesn't
require phantom power when still in phantom power mode can damage your
equipment, as the camera outputs a charge when in this mode. Phantom power can
also take quite a while to discharge after switching it off.
Please be aware that you should wait a few minutes when switching off phantom
power before plugging in any other microphones or XLR audio equipment.

Setup Settings

The 'setup' tab contains your Blackmagic Pocket Cinema Camera's identification settings,
software version, function button settings and other camera settings not directly linked to
recording or monitoring. This menu has four pages, which you can cycle through by tapping
the arrows at the edge of the LCD touchscreen, or swiping left or right.
Setup Settings 1
The first page of your camera's 'setup' tab contains the following settings.
On Pocket Cinema Camera 6K Pro, the first page of the 'setup' tab has a
'display ND filter as' option to customize how the ND filter information is displayed
Standard
SMPTE RP.0155
EBU R.68
Settings 77