Cleaning - Heiniger Xperience Clipper Traduction De La Notice Originale

Oil the blades prior to, during and after every use.
X
Oil the blades no later than when the blades leave streaks or slow down.
X
Apply several drops of oil on the front and on the sides of the clipping
X
blades (see Fig. 10).
Wipe excess oil off with a soft, dry cloth.
X
Lubrication sprays do not have sufficient oil for a good lubrication, but
X
serve for cooling the shearing blades.
Immediately replace damaged or notched blades in order to avoid
X
injuries.
6.7

Cleaning

CAUTION!
IMPROPER CLEANING.
RISK OF DAMAGING THE SHEARING MACHINE!
Clean the shearing machine only with a dry cloth and with the
X
brush supplied. To clean the air filter, use exclusively a dry
brush or a nailbrush.
Never use compressed air for cleaning the clipper.
X
Housing of the shearing machine
Clean the housing of the shearing machine with a dry cloth.
X
Shearing blade and shearing head
Use the brush supplied to clean the clipping blade and the clipper head.
X
Lubricate the clipping blades as described in chapter 6.6.
X
Air filter
Fig. 11
CAUTION!
POSSIBLE DAMAGE TO THE SHEARING MACHINE!
Operating the shearing machine without the air filter can damage
the shearing machine.
Only use the shearing machine with a properly fitted air filter.
X
Translation of the original instructions / Cattle clipper Xperience
Remove the air filter from the clipper.
X
Clean the air filter with a dry brush
X
or a nailbrush. Make sure no foreign
objects get into the device while
cleaning it.
Slide the air filter back onto the
X
clipper.
15