Mettler Toledo WXS Guide De L'utilisateur page 7

**** time between placing the weighed object on the weighing pan and indication of a stable weighing
value under optimal environmental conditions
3.2 Unpacking the Weigh Module
Unpacking the electronic unit and terminal:
1 Remove the top foam cushion.
2 Remove the unit and the hardware.
Unpacking the load cell:
1 Remove the foam cushion and take out the hardware.
2 Carefully lift the white cushion containing the load cell out of the box
and place it on a level surface.
3 Carefully pull the white cushioning material a few inches apart and
remove the load cell.
Note
We recommend to keep the original packaging and to use it to transport the balance. The weighing pan must
always be removed before transportation. Mount the protection cap to protect the interior of the weigh module.
Weigh Modules WXS/WXT Weigh Modules​ ​ 7