Typical Installation - Samoa 404 100 Guide D'instructions Et Pièces De Rechange

EN
DESCRIPTION
Compressed air operated piston reciprocating pumps designed for high
pressure greasing. These pumps are compatible with all types of mineral
greases (up to NLGI-2 viscosity). These pumps can be supplied as
separate components or as complete systems with all the elements
necessary for its installation. These pumps can be mounted on mobile
units as well as on fixed drums, connected to a distribution line.
INSTALLATION
These pumps must be mounted on drums using covers fitted with a 2"
bung. Loose the star nut (1) of the bung adaptor to remove the inferior
nut (3), and screw this into the 2" bung opening of the cover. Place the
star nut (1) and the three jaws (2) on the suction tube. Introduce the
pump through the opening and fasten the assemble at the desired
height (fig 2).
Fasten the cover to the drum.

TYPICAL INSTALLATION

STATIONARY INSTALLATION
Fig. 3
MOBILE UNITS
Fig. 4
2
840801 R. 03/18
SAMOA Industrial, S.A. · Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 - Gijón - Spain · Tel.: +34 985 381 488 · www.samoaindustrial.com
See figure 3 for a typical installation with all the recommended
accessories for the pump to operate correctly.
NOTE: The compressed air supply must be fixed between 3 and 10 bar
(40 – 140 psi), being 6 bar (90 psi) the recommended pressure. An air
closing valve must be installed, in order to be able to close the
compressed air line at the end of the day. (If the air inlet not is closed
and there is a leakage in some point of the grease outlet circuit, the
pump will start automatically, emptying the container).
Pos Description
A Air closing valve
B Filter regulator
C Air hose
D Quick coupling
E Connection nipple
F 55:1 Pump PM3
G Grease hose
H Grease closing valve
I Bung adaptor
J Cover (185 kg drum)
K Follower plate
L Nipple
M Nipple
424170 (no trolley)
424172 (no trolley)
424150 (with trolley)
424152 (with trolley)
Numbers (1,2,...etc) included, letters (A,B,...etc) optional.
Pos Description
1 Drum trolley
2 Grease pump
3 Carrying handle
4 Drum cover
5 Outlet hose
6 Grease gun
A Follower disc
B Nipple
C
Filter regulator
D Connection nipple
E Quick coupling
F Air hose
Fig. 2
Part No.
950319
240500
246010
253114
259014
409200
412190
950304
410000
418006
417004
239005
945516
424170 424172 424150 424152
- - 430000
404100 404100 404100
741603 741602 741603
418013 418002 418013
412102 412102 412102
413080 413080 413080
Optional
417006 417001 417006
239000 239000 239000
240500 240500 240500
259014 259014 259014
253114 253114 253114
243105 243105 243105
430000
404100
741603
418002
412102
413080
417001
239000
240500
259014
253114
243105