Dantherm AD 200 Instructions De Service page 6

Overall description, continued
Device description
Connecting plate
and dry air outlet
6
The following table lists the different parts of the adsorption dryer according to the illustra-
tion Fig. 1 and Fig. 2 .
Pos . Description
1 Regeneration air outlet
2 Hour meter
3 Performance counter in kWh for account-
ing the energy consumption
4 On / Off switch
5 Hygrostat
This illustration shows, where on the unit the dry air outlet is placed:
The dry air is blown into the room through the connecting plate, either with or without con-
nected hoses as desired. Depending on the position of the connecting plate one or two hoses
can be connected.
Connecting one hose
Pos . Description
6 Carrying handle
7 Process air intake
8 Connecting plate for dry air outlet
9 Connecting socket for power cable
Fig. 3
Connecting two hoses