Dantherm AD 200 Instructions De Service page 10

Location, transport and installation, continued
Installation
Warning
CAUTION
Caution
10
During installation of the adsorption dryers the following points must be observed:
• The adsorption dryer must be installed on a horizontal, firm ground.
• Avoid rough handling to prevent damage to the casing.
• The adsorption dryer must be installed in such a way that free air circulation through the
device is guaranteed. The air filter must not be blocked.
• Switch off the device via the on/off switch and disconnect the power plug from the socket
outlet before moving the device.
• The adsorption dryer is equipped with a carrying handle for easy carrying.
In case of doubts about the operating conditions your technical advisor can help you.
Damage to appliance due to improper operating conditions
• Put the device gently down.
• Place the device on firm ground only.
• Always use the carrying handle to lift the device.
• Free air circulation must be guaranteed and the filter must not be covered.