Motor Adjustments; Adjusting The Depth Of The Motor - MINN KOTA 1355954 Manuel Du Propriétaire

MOTOR ADJUSTMENTS

Adjusting the Depth of the Motor

When setting the depth be sure the top of the Motor is submerged at least 12" to avoid churning or agitation of surface water. The
propeller must be completely submerged.
1
a. Firmly grasp the Motor Shaft or Control Head and hold
it steady.
b. Loosen the Adjustable Depth Collar and Steering
Tension Knob until the Shaft slides freely.
c. Raise or lower the Motor to the desired depth.
d. Turn the Control Head to the desired position.
e. Tighten the Depth Adjustment Collar and Steering
Tension Knob to secure the Motor in place.
NOTICE:
Be sure the top of the Motor is
submerged at least 12" below the surface of the
water to avoid churning or agitation of surface
water.
WARNING
The Control Head will create a pinch point if the Depth
Adjustment Knob is loosened and the motor Control Head
slides to the top of the Mounting Bracket. Grasp the Shaft
and prevent it from sliding all the way down to prevent the
pinch point. Grasp the Motor away from the area that may
come in contact with another area of the Motor to prevent
injury.
©2019 Johnson Outdoors Marine Electronics, Inc.
ADJUSTING THE DEPTH OF THE MOTOR
Motor Shaft
12" Minimum
Depth
Control Head
Adjustable
Depth Collar
Steering
Tension Knob
Motor
minnkotamotors.com | 19