The MKA-4 is recommended for use with Maxxum, Maxxum Pro, Riptide SM and Riptide Pro Minn Kota
Item /
Part #
Description
Assembly
A
2994841
BAG ASSY, STABILIZER STRAP
Items 2-10
2
2263464
SCREW-1/4-10 X 1 HH TYPE A SS
4
2011720
LOCKWASHER-PROP (SMALL)
6
2268400
SHAFT-SUPPORT, MAXXUM
8
2268401
BUMPER-SHAFT, MAXXUM
10
2773804
STRAP-HOLD DWN,30.5,w/HANG TAG
p
2264990
INSTRUCTIONS STABILIZER/STRAP
p
Not shown on Parts Diagram.
TOOLS AND RESOURCES REQUIRED
• Hand Saw
MOUNTING CONSIDERATIONS
The Bow-mount Stabilizer Bracket is used to stabilize the Maxxum Mount and reduce bouncing when the motor is stowed and transported.
Attention to detail is needed for successful installation of the stabilizer. When the motor is stowed, the adjustable stabilizer is positioned
vertically between the Upper Arm of the bracket and the deck of the boat. We recommend having the stabilizer kit installed by a qualified
marine installer.
INSTALLATION
Installation of the Hold Down Strap
1
ITEM(S) NEEDED
a.
Before mounting the trolling motor, place the Hold
Down Strap (Item #10) under the Bow-mount
between the Mounting Holes near the back of the
motor rest, with the hook and loop side of the strap
facing down.
b.
Secure the Bow-mount with the Mounting Bolts
included with the trolling motor to capture the Hold
Down Strap as noted in the "Installation of the
Bow-mount" section of the Owner's Manual.
1 | minnkotamotors.com
MKA-4 BOWMOUNT STABILIZER KIT
Qty.
1
1
2
1
1
A A
1
1
• 3/8" Nut Driver
#10 x 1
1a
Bow-Mount
Bow-Mount
®
motors.
2
2
4 4
6 6
8 8
• File or Sandpaper
Mounting
Mounting
Holes
Holes
©2020 Johnson Outdoors Marine Electronics, Inc.
1862013
10
10
Bow
Bow
Hold Down
Hold Down
Strap
Strap