Installation Of The Dust Collection Bag; Important - Advance Advolution 2710 Mode D'emploi

A-10 / ENGLISH

INSTALLATION OF THE DUST COLLECTION BAG

The Advolution™ 2710 uses dust collection bag PN 56391185 (sold 6 to a Package).
See Figure 3. Unfold the Dust Collection Bag (5) and while holding onto the Card Board Retainer (AA) insert it over the Collection Tube (BB)
found on the top of the Pad Drive Deck (1) on the left side of the machine.
IMPORTANT!: Never operate the Advolution™ 2710 without a Dust Collection Bag (5) or the optional Active Dust
Control Kit (21) PN56422083 installed.
(21) is running whenever the Master Key Switch (A) is ON, the Pad Drive Deck (1) is down and the FWD/REV Drive Pedal (8) is off the neutral
position.
Extra Dust Collection Bags can be stored in the Spare Dust Bag Storage (18) box as shown. Install the Rubber Strap (CC) as shown to secure the
bags.
FIGURE 3
A-10 - FORM NO. 56041634 - Advolution™ 2710
Failure to do so will allow the burnishing dust to become airborne. The Active Dust Control Kit
CC
18
5
AA
BB
revised 8/13