Urban Arrow Tender 1000 Manuel De L'utilisateur page 43

6
A sticker in English is adhered to the bottom of the charger
(see 25 in image 1). This says: Use ONLY with BOSCH lithium-
ion batteries.
6
Do not expose the charger to rain or wet conditions. If water
enters a charger there is risk of electric shock.
1
Use caution when touching the charger during the charging
procedure. Wear protective gloves. Especially in high ambient
temperatures, the charger can heat up considerably.
Image 27: Charging a battery
2
The e-bike battery is equipped with a temperature control
indicator, which enables charging only within a temperature
range between 0 °C and 40 °C. The battery can be recharged
at any time without shortening the lifespan and interrupting
the charging process does not damage the battery.
User manual
2
The electrical drive unit is deactivated during the charging
procedure.
2
The e-bike battery must not be left unattended while
charging.
Charging the e-bike battery while placed in the battery holder is
done as follows:
1. Press the on/off button 46 to switch off the battery.
2. Clean the cover of the charge socket 49. Avoid soiling the
charge socket and the contacts, e.g. by means of sand or soil.
3. Lift the cover of the charge socket.
4. Plug the charger plug 22 into the charge socket 48 on the
bottom part of the battery holder (see image 28).
5. Plug the charger plug 26 of the power cord into the charger
socket 23 of the charger.
6. Connect the mains cable of the battery charger to the mains
supply. The charging procedure will start.
See below for more information on the charging status
Tip
and what to do after charging.
EN
41