Switching The E-Bike Battery On And Off; Parking The E-Bike Or Going For A Ride - Urban Arrow Tender 1000 Manuel De L'utilisateur

Image 21: Switching the display on and off

5.6.4 Switching the e-bike battery on and off

Switching on the e-bike battery is done as follows:
1. Press the on/off button 46 of the battery 47 .
The LEDs of indicator 44 light up and at the same time
indicate the charge condition.
Switching off the battery is done as follows:
1. Press the on/off button 46 of the battery 47 .
The LEDs of indicator 44 go out. This also switches off the
e-bike.
2
If the capacity of the e-bike battery is below 5%, no LED on
the charge-control indicator 44 lights up. It is only visible on
the display, if the e-bike is switched on.
2
If no power is drawn from the e-bike drive for about 10
minutes (e.g. because the e-bike is not moving) and no button
is pressed on the display or the control unit of the e-bike, the
e-bike and therefore also the e-bike battery will shut down
automatically to save energy.
32

Parking the e-bike or going for a ride

5.7
When you want to park the bike, put the brake on the parking lock.
Activating the parking brake is done as follows (see image 22):
1. Pull and hold the front brake lever towards the handgrip.
2. Rotate the lock of the parking brake system 53 away from the
handlebar. When you release the front brake lever the brake
remains activated.
2
Never leave the Intuvia display or the battery on the e-bike
when you park the e-bike to prevent theft of the display and/
or the battery.
2
Park your bike in a socially acceptable manner. Don't block
the road or sidewalk.
2
Image 22: Locking the parking brake
Releasing the parking brake is done as follows (see image 23):
1. Pull the front brake lever towards the handgrip. The lock of
the parking brake system 53 rotates to a neutral position
automatically.
2. Release the front brake lever.
1