Switching The Push Assistandce Mode On Andd Off With And Intuvia Display; 19 6.3 Switch Push Assistance Mode On And Off - Urban Arrow Tender 1000 Manuel De L'utilisateur

button 97 less than 1 second until the desired assistance
level appears on the indicator 91.
b. Shifting to a lower assistance level by pressing the -
button 96 less than 1 second until the desired assistance
level appears on the indicator 91.
2
When the display is set to TRIP, TOTAL or RANGE the
selected assistance will only be shown for about 1 second on
the display when changing the assistance level.
6.3 Switch push assistance mode on and off
The push assistance feature makes it easier to push the e-bike. The
speed in this function depends on the set gear and cannot exceed
6 km/h (max.). The lower the set gear, the lower the speed in the
push-assistance function (at full output). How the push assistance is
switched on or off depends on the type of display on your bike.
1
The cranks with the pedals will rotate when the push
assistance is switched on. Make sure your legs are a
sufficient distance away from the cranks with the pedals.
There is risk of injury.
1
Never use the push-assistance function when the bike is
locked. This may lead to damage of your spokes.
User manual
6.3.1 Switching the push assistance mode on and off with an
Intuvia display
Switching on the push assistance when you have an Intuvia display
is done as follows:
1. Press and hold walk button 54 on the control unit. The
electrical drive unit is switched on.
2
The push assistance cannot be activated in the OFF
assistance level.
There are multiple situations in which the push assistance of the
Intuvia display switches off:
1. When you release the walk button 54.
2. In case the wheels of the e-bike are blocked (e.g. by applying
the brakes or hitting an obstacle).
3. When the speed of your e-bike exceeds 6 km/h.
6.3.2 Switching the push assistance mode on and off with a Purion
display
Switching on the push assistance when you have an Purion display
is done as follows:
1. Press the walk button 93 on the display for less than 1
second. The push assistance is activated.
2. Press and hold the + button 97 within 3 seconds after
activation. The electrical drive unit is switched on.
2
The push assistance cannot be activated in the OFF
assistance level.
EN
37