Customize Your Massage - Human Touch CERTUS Manuel D'utilisation Et D'entretien

take control

CUSTOMIZE YOUR MASSAGE

You can use the Manual Massage screen to completely customize your
massage. To access the Manual Massage screen:
1. From the main menu, swipe from right to left to access the second
menu page.
2. Select Manual Massage.
3. Select a massage mode.
MODE
Alternates rapid-tapping strokes along the spine to stimulate both spinal muscles and spinal
PERCUSSION
joint areas, emulating the percussive massage technique used in sports medicine for deep
muscle therapy.
TAP A pulsing and rolling massage.
Kneads your back in a small, circular motion on both sides of your spine simultaneously.
KNEAD
ROLLING
Rolls gently up and down your back near your spine.
KNEAD &
Combines circular kneading motion with rapid-tapping percussion strokes.
PERCUSS
humantouch.com
DESCRIPTION
22
Set robotic massage position
You can choose to massage your whole body (default), a six-inch area,
or a single spot.
1. From the Manual Massage screen, select Position.
2. Select the desired focus:
• Whole - massages your whole body.
• Partial - massages a six-inch zone.
• Point - massages a single spot. After selecting this option, press
and hold the arrows on the bottom of the Position tab to adjust
the position as desired.
IMPORTANT: Wait until the massage mechanism is in the target area before
selecting Partial; you cannot adjust the position once it is set.
Turn the heat on/off
You can turn backrest and inner calf heat on/off separately.
1. From the Manual Massage screen, select Heat.
2. Tap the desired heat icon to toggle the heat on/off in that area.
Focus the cloud touch acupressure
You can choose to enjoy air massage on your whole body, upper body,
waist and hip area, or feet and calves.
1. From the Manual Massage screen, scroll down and then select
Cloud Touch.
2. From the Cloud Touch tab, select the desired air massage zone.
3. Select an active zone to turn it off.
23