Human Touch CERTUS Manuel D'utilisation Et D'entretien page 7

2. Flip the two mounting brackets up (Fig.10).
Bracket
3. Place the massager into position, connect the
connector to the chair (with the tab facing
toward you), then connect the air hose to the
chair (Fig.11).
Connector
humantouch.com
Fig.10
Air hose
Fig.11
10
4. Slide the two massager mounting posts into the
brackets on the chair; the brackets on the chair
flip forward to secure the posts (Fig.12).
5. Replace the two Phillips-head screws and washers you
removed in step 1 (Fig.13).
Bracket Bracket
Mounting post Mounting post
Fig.12
Fig.13
11