Choose A Location - Human Touch CERTUS Manuel D'utilisation Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

get
ready
UNPACK THE BOX
Box 1
Calf massager
Chair base
Use and care manual
250V, 5A Fuses (2)
Tablet holder
Tablet

CHOOSE A LOCATION

When deciding where to place your Certus, consider the following:
• Place the unit on a flat surface, away from direct sunlight or any other direct heat source (to avoid fading).
• If you wish to place the unit on a hard surface, it is recommended that you place a piece of carpet or a soft mat
underneath it to avoid damaging the floor.
• To accommodate the footrest when deployed, make sure the area in front of the chair is clear for at least five inches.
• The chair moves forward as it reclines, so you can place it right next to the wall.
humantouch.com
Box 2
Side panels
Warranty Insert
Phillips-head
screwdriver
4
Your massage chair
1. Install the tablet.
requires some assembly:
2. Attach the side panels.
3. Install the foot and calf massager.
4. Install the tablet holder.
5. Attach the pads.
Then just plug it in, power it on, and you're all set!
MOVE THE CHAIR TO THE DESIRED LOCATION
1. Grasp the front of the chair frame on both sides (Fig.1).
2. Lift up to rotate the chair onto its mobility wheels.
3. Roll the chair on its mobility wheels to the desired location.
4. Gently lower the chair all the way to the floor.
WARNING: Dropping the front of the chair to the floor may damage the chair and/or floor.
Wheels
5
Fig.1

Publicité

Table des Matières
loading

Table des Matières