Your Human Touch Massage Chair Comes With A Detached; Connect The Cables - Human Touch ht 7450 Mode D'emploi Et D'entretien

3. Replace the screw knobs
From the bottom of the backrest, install and hand tighten
the two screw knobs. Verify that the two screw knobs are
installed and tightened before using the chair.

4. Connect the cables

Connect all cables on the left-hand side of the backrest to
the corresponding connectors on the left-hand side of the
chair base.

Your Human Touch massage chair comes with a detached

backrest—protecting the environment by using less
packaging and making it easier to maneuver the chair
through tight doorways and corners. Assembling your chair is
easy, just attach the backrest, connect the cables, place the
head pillow and you're done!
Place the head pillow flap over the top
of the headrest.The weighted pillow flap
keeps the head pillow in place.
7
Fully assembled
HT-7450