Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
get
ready
Unpack the box
Chair base
Seat cushion
Support pillow
Power cord
Allen wrech
Backrest
2. Gently raise the backrest to
the upright position.
The backrest automatically locks into place.
humantouch.com
1. Remove the robot safety screw.
CAUTION: You must remove the robot safety screw before powering on your chair,
using the provided Allen wrench. Discard the screw and wrench after removal.
Robot safety screw
Allen wrench
Seat cushion
3. Attach the seat cushion.
Align and press the seat cushion
firmly into place.
4
4. Attach the support pillow.
Attach the support pillow to the chair using the hook-and-loop fasteners.
Support pillow
humantouch.com
Your iJOY Massage Chair 2.1 by Human Touch
requires some simple assembly.
Simply attach the seat cushion and support pillow, remove the robot safety
screw, plug it in, and you're done!
5. Plug it in.
First plug the power cord into the chair's power panel, and then
plug the other end into an appropriate power source.
Power cord
Back of chair
5 5
Publicité
Table des Matières
