Human Touch CERTUS Manuel D'utilisation Et D'entretien page 6

3. Replace the screw and washer you removed in step 1
to finish securing the side panel to the chair.
4. Connect the two side panel hoses to the
corresponding fittings on the chair (they are color
coded) (Fig.6).
5. Repeat steps 1-4 to install the right-hand side panel.
6. Connect the three right-hand side panel connectors to
the corresponding connectors on the chair (Fig.7).
humantouch.com
Fig.6
Hoses
Connectors
Fig.7
8
7. Position the tablet cable so it runs next to the side panel
toward the front of the chair, then press the left-hand
side panel upholstered flap down onto the seat to secure
it over the cable connections (the flap is attached using
hook-and-loop fasteners) (Fig.8).
8. Press the right-hand side panel upholstered flap down
onto the seat to secure it over the cable connections.
Install the foot and calf massager
1. Remove the two Phillips-head screws and
washers from the foot and calf massager
mounting brackets on the chair (Fig.9).
Tablet cable
Fig.8
Fig.9
9