BH LK700IC Manuel Du Propriétaire page 16

STEP 6. ATTACHING THE COMPUTER
Slide the battery slot off the back of the
Computer (92) and install the batteries.
Replace cover. There is a screw on the back of
the Computer (92), take this off and slide the
Computer (92) onto the Computer Bracket.
Secure the Computer to the Computer
Bracket with the screw from the back of the
computer.
Next, connect the Computer Cable (86) to
the back of the Computer (92) and make sure
the other side of the Computer Cable (86)
is connected securely to the cable coming
from the frame. Additionaly, make sure that
the Cable Stopper (93) is plugged into the
hole that the lower cable connections came
through.
STEP 7. ATTACHING THE
WATER BOTTLE
Unscrew the Screws (16) on the front right
leg of the bike. Align the holes of the water
bottle holder with the holes on the leg and
secure with two Screws (16).
STEP 8. INSTALLATION
After installation, please check carefully to ensure all screws and nuts are fully fastened.
16