Accessory List - NSK Ti-Max Z-SG45L Manuel D'opération

CAUTION
• Do not use the following fluids to wipe, immerse or clean the product; strong/super acid water, strong acid/alkaline chemicals, chlorine-
containing solutions, solvents such as benzine or thinner.
• The handpiece is delivered in a non-sterile condition and must be autoclaved prior to use.
• Perform regular function and maintenance checks. (Refer to "9. Periodical Maintenance Checks")
• If the handpiece has not been used for a long period, rotate the handpiece and check for noise, vibration and overheating before use.
• To avoid clinical downtime it is recommended that a spare be kept on hand in case of a breakdown during treatment.
• The operation of the handpiece is permitted only on dental units which correspond to the standards IEC 60601-1 (EN 60601-1) and
IEC 60601-1-2 (EN 60601-1-2).

3. Accessory List

No. Part Name
1 E Type Spray Nozzle
2 Purge Nozzle
Quantity
1
1
5