NSK Ti-Max Z-SG45L Manuel D'opération page 4

WARNING
• Ball bearings are wear items and may require replacement. Be sure to inspect the handpiece before use (Refer to
"7. Checking the Handpiece Before Each Use"). If abnormal vibration or noise are found, the bearings or other internal parts
may be worn out or damaged. Damaged parts may lead to handpiece overheating causing burn injuries. If overheating is
suspected, stop using the handpiece immediately and contact your Authorized NSK Dealer.
CAUTION
• When operating the product always consider the safety of the patient.
• Users are responsible for the operational control, maintenance and continual inspection of this product.
• Prior to clinical use, inspect the handpiece. Check for vibration, noise and overheating. If any abnormalities are found, stop using the
handpiece immediately and contact your Authorized NSK Dealer. (Refer to "7. Checking the Handpiece Before Each Use")
• Do not disassemble or alter the handpiece except as recommended by NSK in this Operation Manual.
• Do not allow any impact on to the product. Do not drop the product.
• Operators and all others in the area must wear eye protection and a mask when operating this handpiece.
3