Safety, Hazard And Warning Symbols On The Instrument - Megger DLRO10HD Guide D'utilisation

1. 2 Safety, Hazard and Warning Symbols on the Instrument

This table details the various safety and hazard icons on the instruments outer case.
Icon Description
F
Warning: High Voltage, risk of electric shock
G
Caution: Refer to User Guide
Equipment complies with current EU directives
Equipment complies with current 'C tick' requirements
Do not dispose of in the normal waste stream
This table details the warning icons that can show on the display.
Icon Warning
F
External Voltage Warning
www.megger.com
Description
If an external voltage is applied between the terminals and the
instrument is set to On, the High Voltage warning will flash
on the display. This is a warning that the item under test is
live and might be dangerous and testing is disabled. The High
Voltage warning message will flash if more than 50 V potential
difference is applied between the Voltage terminals and the
Current terminals. This warning will not show if all terminals
are at the same high voltage.
Note: The warning will not operate if the instrument is set
to Off.
3