Table des Matières

Publicité

Special precautions are necessary when 'live' earths may be encountered, and isolation switches and fuses
are needed in this situation. See 'Operation - Earth Testing Safety Precautions'.
The earth spikes, test leads and their terminations must not be touched while the instrument is switched 'On'.
When working near high tension systems, rubber gloves and shoes should be worn.
The DET2/2 must be disconnected from any external circuit while its battery cells are being charged.
A 12 V d.c. battery must not be used as an external supply while it is still connected to the vehicle.
Replacement fuses must be of the correct type and rating
Before charging the DET2/2 battery ensure that the correct supply fuse is fitted and the voltage selector is
set correctly.
Warnings and precautions must be read and understood before the instrument is used. They must be
observed during use.
THE INSTRUMENT MUST ONLY BE USED BY SUITABLY TRAINED AND COMPETENT PERSONS
2

SAFETY WARNINGS

NOTE
.

Publicité

Table des Matières
loading

Table des Matières