Control Panel Functions; Indicator Lights - Power Fist 8700718 Mode D'emploi

8700718
CONTROL PANEL
J Overload Indicator
K Oil Warning Indicator
L AC Pilot Indicator
M 12V DC Port
N DC Circuit Breaker
O AC Circuit Breaker
P Ground Terminal
Q 3-in-1 Start Switch (OFF,
RUN and CHOKE)
R Economy Switch
S 120V AC Outlet
T Parallel Outlets

CONTROL PANEL FUNCTIONS

3-IN-1 START SWITCH (Q)
Start Switch (OFF)
The start switch position shuts off the fuel valve and
the engine will not run (Fig. 3-1).
Start Switch (RUN)
The start switch position 1 opens the fuel valve and
the engine can start (Fig. 3-2).
Start Switch (CHOKE)
The start switch position CHOKE opens the fuel valve but restricts the air flow
(Fig. 3-3). Use this position when starting a cold engine. Once the engine has
warmed, switch to position 1 (ON).

INDICATOR LIGHTS

Oil Warning Indicator (K)
The oil warning indicator (Fig. 4-1) glows when the engine's oil level is too low.
The engine stops automatically. The engine will not run until the oil is
replenished. See the Engine Oil section for information on the oil system alert,
how to check and change oil.
8
2,000W Inverter Generator
For technical questions call 1-800-665-8685
V4.1
Fig. 2
Fig. 3