Power Fist 8700718 Mode D'emploi page 27

V4.1
ADDING A GASOLINE STABILIZER
1. Fill the fuel tank with fresh gasoline. If the tank is only partially filled, air in the
tank will promote fuel deterioration during storage.
2. Add gasoline stabilizer. Ensure that the instructions for that product are followed.
3. Run the generator outdoors for 10 minutes to ensure that treated gasoline has
replaced the untreated gasoline in the carburetor.
4. Stop the engine
CLEANING
WARNING! Use only a nonflammable solvent, not gasoline, to clean engine
parts. Keep all sources of ignition away from fuel related parts. Fumes are
flammable and may catch fire, causing a burn injury.
NOTICE! Do not clean the engine's exterior with a garden hose or pressure
washer. Water can enter the engine through the air filter or muffler opening and
damage the cylinder.
1. If the generator has been running, allow it to cool for at least half an hour
before cleaning.
2. Clean all exterior surfaces.
3. Touch up any damaged paint.
4. Coat other areas that may rust with a light film of oil.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
Contact your local municipality for a list of disposal facilities or by-laws for
electronic devices, batteries, oil or other toxic liquids.
IMPORTANT! DO NOT pollute the environment by allowing uncontrolled
discharge of waste oil.
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool does not function
properly or parts are missing. If unable to do so, have a qualified technician
service the tool.
Visit www.princessauto.com for more information
2,000W Inverter Generator 8700718
27