Electrical Safety - Power Fist 8700718 Mode D'emploi

8700718

ELECTRICAL SAFETY

WARNING! Do not touch or handle a live tool with any part of your body that is
wet or damp. Wet skin reduces resistance to electrical current, increasing
the danger of a serious or fatal shock.
WARNING! To reduce risk of electric shock, be certain that the plug is
connected to a properly grounded receptacle.
1. The generator (stator winding) is isolated from the frame and from the AC
receptacle ground pin. Electrical devices that require a grounded receptacle pin
connection will not function if the receptacle ground pin is not functional.
2. Protect yourself against electric shocks when working on electrical
equipment. Avoid body contact with grounded surfaces. There is an
increased chance of electrical shock if your body is grounded.
3. Do not expose the tool to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.
4. Do not alter any parts of the tool or accessories. All parts and accessories are
designed with built-in safety features that may be compromised if altered.
5. When wiring an electrically driven device, follow all electrical and safety
codes, as well as the most recent Canadian Electrical Code (CE) and
Canadian Centre for Occupational Health and Safety (CCOHS).
WARNING! All wiring should be performed by a qualified electrician.
ENGINE REFUELING PRECAUTIONS
1. Never remove the fuel cap or add fuel with the engine running. Stop the engine
and allow both the engine and exhaust components to cool before refueling.
2. Never add or drain fuel from the engine while indoors.
3. Never refuel or store the machine in a place where there is open flame,
spark or other ignition source.
4. Do not attempt to start the engine if fuel is spilled. Clean up the spill and
dispose of any rags properly before restarting.
5. Replace and tighten the fuel cap after refueling.
6
2,000W Inverter Generator
For technical questions call 1-800-665-8685
V4.1