Table Des Matières; Preparing For Installation; Checking The Parts - Sony SU-WL450 Informations D'installation

Table of Contents
Preparing for installation ................................. 5
Checking the parts ........................................... 5
Deciding on the installation location .............. 6
Installing the Base on the wall ........................ 8
Preparing for the installation of the TV ........... 9
KD-85/75XG85, KD-75XG87 .....................9
KD-65/55XG87, KD-65/55XG85 .............. 11
Installing the TV on the wall ........................... 13
KD-85/75XG85, KD-75XG87 ....................13
KD-65/55XG87, KD-65/55XG85 ..............15
Confirming the completion of the
installation ......................................................18
Other information ............................................... 18
Specifications ..................................................18
Installing the TV onto the wall
Installation procedure differs, depending on
your TV.
Use the Wall-Mount Bracket SU-WL450 to
install the TV to the wall.
Note
 Be sure to store the removed screws in a safe place,
keeping them away from children.

Preparing for installation

 Have the TV's Reference Guide and Setup
Guide at hand before installation.
 Be sure to have a Phillips screwdriver that
fits the screws prior to the assembly.
 Confirm the installing position of your TV.
 Prepare four or more screws of 8 mm
diameter and one screw of 5 mm or
equivalent (not supplied). Select screws
suitable for the material of the wall.

Checking the parts

Supplied with SU-WL450
 Verify that all the parts are included.
 Base (20) (1)
 PSW 6x20 (4)
 Spacer (20) (2)
 Bush (20) (M4) (2)
 Base Adaptor (2)
 Spacer (60) (2)
 Bush (M4) (2)
− 5 (GB) −
 Pulley (2)
 PSW 4x20 with
Bush (2)
 Belt (1)
 PSW 4x20 (2)
 PSW 4x10 (8)
 PSW 6x50 (2)
 PSW 4x50 (2)
GB