Functional Description; Assembling Instructions; Extent Of The Delivery; Assembling The Handle Bar - Grizzly EV 1201-31 ZV Traduction De La Notice D'utilisation Originale

GB
6 2 Phillips screws for mounting
the bar
7 2 rear wheels
8 2 wheels
9 Implement case
10 Setting button
11 a/b 2 cable clamps
12 a/b 4 screws and 4 wing nuts for
attaching the bar
13 Connector
14 Unlocking button
15 Cable strain relief
16 Starting lever
17 Scarifier drum w/ blade (installed)
18 Aerator cylinder with sprung
tines (sold separately)
19 Shaft
20 Mounting bolt for drum
21 Bearing cover
C
22 Bag rod assembly
23 Plastic links
24 Pins

Functional description

The verticutor and lawn aerator has two
easily exchangeable work cylinders:
An aerator cylinder made of hard plastic
with vertically rotating sprung tines, and a
verticutor cylinder with vertically mounted
high-grade steel knives.
The implement features a high-quality
plastic case with collection bag and a
handle bar with a folding function. Please
refer to the subsequent descriptions for
the actual functions of the individual con-
trol elements.

Assembling instructions

Prior to any work on the implement
always disconnect the plug from
the power socket!
54

Extent of the delivery

Carefully unpack the implement and
check that all the subsequently listed
parts are complete:
• Implement case with verticutor cylin-
der and impact protector
• Complete bar assembly with start
lever, power plug, release knob and
permanently attached power cord
• Lower bar
• 2 centre bars
• 2 cable clamps
• Mounting accessories:
• Instruction Manual
Ensure during assembly that the
power cable is not squeezed and
that it has sufficient play.

Assembling the handle bar

1. Insert the lower bar (5) into the
B
implement case (9) and screw it
on with the two Philips screws.
2. Secure the two centre bars (2)
to the lower bar (5) with the
screws and wing nuts (12a).
3. Use the screws and wing nuts
(12b) from the package to
mount the upper bar (1) on the
two cross bars (2).
4. Use the two cable clips (11 a/b) to
attach the power cord to the bar.
Mounting and emptying the
collection bag
(sold separately)
WARNING: Never operate the
implement without the impact
protector. Danger of Injury!