Grizzly EV 1201-31 ZV Traduction De La Notice D'utilisation Originale page 50

GB
Operating the implement:
WARNING! The implement
can cause serious injuries.
How to a avoid accidents
and injuries:
Preparations:
• The implement is not suitable
for use by children.
• Never allow children and peo-
ple who are not familiar with
these Operating Instructions to
use the implement. Local regu-
lations may stipulate a mini-
mum age for operators.
• Never start up the implement
while other people, but espe-
cially children and domestic
pets, are in the vicinity.
• Check the area on which the im-
plement is to be used. Remove
all stones, sticks, wire and other
foreign bodies that could be
caught up and flung out.
Never use the implement to
level out uneven patches.
• Always wear appropriate pro-
tective work clothes and firm
shoes with non-slip soles, strong
long trousers, ear defenders
and goggles. Never operate the
implement while bare footed or
when wearing open sandals.
The protective devices and
your personal protective equip-
ment will protect yourself and
other people and ensure that
the equipment can be smoothly
operated
• Never operate the implement
if it is damaged, incomplete or
has been modified without the
consent of the manufacturer.
50
Never work with damaged or
missing protective devices (e.g.
starting lever, unlocking knob,
impact protector). Never disen-
gage protective devices (e.g.
by tying the starting lever).This
ensures that the equipment re-
mains safe.
• Before starting the equip-
ment, ensure that no objects or
branches are pushed into the
blade opening, that the equip-
ment is standing stably and that
the workspace is tidy and not
blocked.
Check the condition of your ex-
tension cable and the connecting
cable of your equipment. Use the
necessary protective equipment.
There is a risk of injury.
• If your equipment vibrates or
emits unusual noises when
switched on, disconnect the
plug from the socket and check
the cutting cylinder. Ensure that
no remains of chopped matter
are blocking the cutting cylinder
or jammed between the blades.
If you find no problems, return
the equipment to a customer
service centre.
• If the blades no longer cut cor-
rectly or if the motor is over-
loaded, check all the parts of
your equipment and replace the
worn parts. If a more extensive
repair is required, contact a
customer service centre.
Use:
• CAUTION – A very sharp tool.
Avoid cutting your fingers or
toes. While working always
keep your feet and fingers well