Functional Description; Assembling Instructions; Extent Of The Delivery; Fitting The Wheels - Grizzly EV 1800-40 S Traduction De La Notice D'utilisation Originale

14 Impact protector
15 Lever for height adjustment
16 Connector
17 Hub cap
18 Nut
19 Lock washer
20 Conical spring washer
21 Wheel adjustment rod
22 Plastic links
23 Bag rod assembly
24 Pins
25 Scarifier drum w/ blade
(installed)
26 Mounting bolt for drum
27 Bearing cover
28 Shaft
29 Washer
30 3 screws
31 Shaft cover
32 Plastic bearings

Functional description

The verticutor has a verticutor cylinder
with vertically mounted high-grade steel
knives, which is easily exchangeable.
The implement features a high-quality
plastic case with collection bag and a
handle bar with a folding function. Please
refer to the subsequent descriptions for
the actual functions of the individual con-
trol elements.

Assembling instructions

Prior to any work on the implement
always disconnect the plug from
the power socket!

Extent of the delivery

Carefully unpack the implement and
check that all the subsequently listed
parts are complete:
• Implement case with verticutor cylin-
der and impact protector
• 4 wheels
• Complete bar assembly with start
lever, power plug, release knob and
permanently attached power cord
• Lower bar
• Wheel adjustment rod
• 2 cable clamps
• Mounting accessories
• Instruction Manual
Ensure during assembly that the
power cable is not squeezed and
that it has sufficient play.

Fitting the wheels

1. Turn the machine over.
2. First, position a conical spring
washer (20) on the wheel hub,
then a wheel (10), then a lock
washer (19) and finally a nut
(18).
3. Tighten the nut (18) firmly.
4. Cover the wheel hub with the
cover (17).
5. Apply this approach to all 4
wheels.
GB
65