Publicité
Les langues disponibles
Les langues disponibles
TOYOTA RAV4
Figure 7
Figure 8
Figure 9-1
Issue C: February 4, 2013
- 2013 -
Clip Removal Tool, Small Flat Screw Driver
Step 7
Remove LH Rear Under Tray by removing 5x Scrivets.
Retain all parts.
Repeat for RH Side.
See Figure 7.
10mm Socket 3/8" drive, Ratchet w/ Med. Extension,
Phillips #2 Screw Driver
Step 8
Remove Bumper by removing 1x Screw in each Wheel Arch and
2x Screws on Rear Face.
Disconnect Rear Part Assist Wiring Loom Plug in LH Rear Inner
Corner (if applicable).
Pull Bumper Sides Outwards to release.
Retain all parts.
See Figure 8.
12mm Socket 3/8" Drive, Ratchet w/ Med. Extension
Step 9
Remove Rear Impact Beam by removing 6x Bolts.
See Figure 9-1.
Page 7 of 21
TOWING HITCH
Publicité
