Publicité
Les langues disponibles
Les langues disponibles
TOYOTA RAV4
Figure 17
Figure 18
Figure 19
Issue C: February 4, 2013
- 2013 -
18mm Socket 1/2" Drive, Ratchet w/ Med. Extension
Step 17
Re-install Tow Hook on LH Chassis over Body Brace (Item 5)
using 2x M12 Bolts & Washers (Items 13 & 14). Use 1x M12
Thick Washer (Item 19) in forward most mount point (between
Tow Hook and LH Sidearm) to accommodate Body Brace
material thickness.
See Figure 17.
18mm Socket 1/2" Drive, Ratchet w/ Med. Extension
Step 18
Loosely secure Body Brace (Item 5) over RH Sidearm (Item 4)
using 2x M12 Bolts & Washers (Items 13 & 14).
See Figure 18.
13mm Socket 3/8" Drive, Ratchet, Scraper
Step 19
Loosely secure LH Reinforcement Plate (Item 6) inside vehicle
cabin using 4x M8 x 25 Bolts and Washers (Items 18 & 17).
Install Bolts & Washers from underside through Body Brace
(Item 5).
Repeat for RH Reinforcement Plate (Item 7).
See Figure 19.
Important: Remove all excess sealant so that
Reinforcement Plates sit flat. Coat any bare metal with 3M
Ultra Underbody Sealant - C0009-08302 (Item 22).
Page 11 of 21
TOWING HITCH
Publicité
