TOYOTA RAV4
Figure 25
Figure 26
Figure 27
Issue C: February 4, 2013
- 2013 -
10mm Socket 3/8" drive, Ratchet w/ Med. Extension,
Phillips #2 Screw Driver
Step 25
Re-install Bumper.
Reinstall LH and RH Rear Under Tray.
Reinstall LH and RH Mud Flaps.
See Figure 25.
Step 26
Refit Muffler.
See Figure 26.
If installing with Trailer Wire Harness, refer to Trailer
Wire Harness instructions.
10mm, 14mm Socket 3/8" Drive, Ratchet w/ Med.
Extension, Torque Wrench, Phillips #2 Screw Driver
Step 27
Refit LH and RH Rear Interior trim panels.
Ensure Rear Interior Light Plug is reconnected.
Torque Seat Belt & Cargo Tie down Bolts to 42 Nm (31.0 ft-lbf).
See Figure 27.
Page 15 of 21
TOWING HITCH