Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
TOYOTA RAV4
USE THIS TEMPLATE TO CUT THE CENTRE OF THE BUMPER
Ensure that all dimensions of the template are to scale before proceeding.
1.
Cut lower edge of template using scissors.
2.
Generously apply tape to the anticipated cutting area on the Bumper to protect it from damage. See Figure 23-1.
3.
Position the template on the outside of the Bumper.
4.
Align edge on template with the lowest edge on the Bumper and tape the template to the Bumper. See Figure 23-2.
5.
Using Tin Snips, carefully cut along
6.
Carefull remove template and tape from the Bumper
NOTE: Take care to cut safely, neatly and along dotted lines marked on the template.
Issue C: February 4, 2013
- 2013 -
RAV4 2013-
P/N: PZQ64-42095
IMPORTANT INFORMATION
DOTTED LINES
marked on the template. See Figure 23-3 and Figure 23-4.
Page 21 of 21
TOWING HITCH
Publicité
Table des Matières
