Function Of Powerline Network (Powerline Communication); Basic Functions - NUK Eco Smart Control 300 Mode D'emploi

7. By pressing "Search", a new menu will
appear in which you can set the search
period.
If you select "Custom period", you can
enter the date and time for the search
period.
8. To view the recordings on a PC, you will
need the following:
– a USB adapter to connect the MicroSD
card with the PC, a reader or a
MicroSD slot on your PC;

8.1 Basic functions

A Powerline adapter 17 is integrated into
your electric supply network via a socket.
The power cable is used to connect the
adapter to the Internet via your router or
modem.
A Powerline adapter is also installed in the
camera, which exchanges data with the
Powerline adapter 17 via your supply cable.
The Powerline adapter 17 creates its own
WiFi/WLAN network which your smartphone
uses to access up to 4 connected cameras
from home or on the go (see "5.3 Preparing
the smartphone/tablet" on page 26).
The Powerline network comes with a
standard encryption.
8.2 Setting up a second
network
Normally (with just one camera 11 and a
Powerline adapter
factory-provided
unproblematic. It is identical for both the
camera and the Powerline adapter 17 to
ensure they work successfully with each
other.
A second network only needs to be set up if
the installation is an elaborate one, involving
several cameras and Powerline adapters
that need to work independently of each
other.
8. Function of Powerline network
(Powerline Communication)
17), the standard,
encryption
– video playback software that can read
and playback the camera's HD264
format (a codec may need to be
retrofitted) or video converter software
that converts the HD264 video camera
format to a well-established format,
such as mp4.
9. To delete all videos, the MicroSD card will
need to be reformatted (see "Formatting
the SD card:" on page 31). It is not
possible to delete videos individually.
As both networks use the same supply
cables, you will need to have different
encryptions.
To set up a new encryption for the second
network, proceed as follows:
1. Separate the cameras and the Powerline
adapter for the first network from the
electric supply.
2. Set up the second network, comprising
one or several cameras and a Powerline
adapter with the standard encryption
(see "5. Starting the device" on page 25).
3. Press and hold the button
on the underside of the
Powerline adapter 17 for
between 1 and 3 seconds.
4. The Powerline adapter will now create a
is
new encryption.
5. Press the Network security button 5 for
all cameras on the second network within
120 seconds.
The cameras will assume the new key
from the Powerline adapter and will now
work together with it.
32