For safety reasons, the transfer time is
restricted to 120 seconds. If you are not
immediately successful at setting all
cameras to the new key within this time,
start again at point 3.
6. Connect the Powerline adapter and
cameras on the first network to the
electric supply once again.
As both networks are now working with
different encryptions, they can be operated
independently of each other.
8.3 Resetting the encryption
To reset the encryption for the second
network
to
the
proceed as follows:
9. Connecting an external loudspeaker
In order to be able to speak with your child
via
your
smartphone,
loudspeaker needs to be connected to the
video
camera.
particularly suitable here.
Note: Under certain circumstances, your
words may be transmitted at a delay due to
10. Cleaning and maintaining the device
10.1 Cleaning
Warning! To avoid the risk of
electric shock, injury or damage:
– Always disconnect the camera
supply cable from the power
socket
device.
– Never immerse the individual
parts in water.
Caution! Under no circumstances use
abrasive, corrosive or scratching cleaning
agents, as these could damage the device.
1. If necessary, wipe the individual parts
with a damp cloth.
2. Only use the baby phone again when all
the parts have fully dried out.
standard
encryption,
an
external
PC
loudspeakers
before
cleaning
1. Press and hold the button
on the underside of the
Powerline adapter 17 for at
least 15 seconds.
The
encryption
Powerline adapter will then
be reset to the standard
encryption.
2. Press and hold the Network security
button 5 on the cameras for at least
15 seconds.
The encryption for the camera will then
be reset to the standard encryption.
the fluctuating WLAN or mobile data
transmission rates.
The loudspeaker is connected to the socket
are
3 with a 3.5 mm phone jack.
Technical data:
• Impedance: 8 Ohm or active loudspeaker
• Connection: 3.5 mm stereo phone jack
3. Carefully clean the camera lens when
necessary with a soft cloth, e.g. tissue for
cleaning spectacles.
the
33
for
the