Using The Android App - NUK Eco Smart Control 300 Mode D'emploi

12.To display the camera signals, tap the
name of the required camera and the
camera image
smartphone.
6.1 Starting the app and
viewing the live image
1. To start the NUK LiveCam app,
press the corresponding symbol
on your smartphone.
The start screen will appear.
If there is no camera connected yet, the
NUK camera will not appear in the list. In
this case, carry out the steps as
described in
smartphone/tablet" on page 26.
will appear on

6. Using the Android app

"5.3 Preparing
13.If the message "Unknown device" or
"Connection failed" appears, start the
the search again:
– Press the button
– Press the button
The search for a camera will start again.
2. To view the live image, tap the NUK
camera.
The live image will provide the following
information (not with tablets):
– Connected: Shows that there is an
active connection to the camera.
– 640 x 480: The resolution of the video
image transmitted.
– Connected
smartphones
the
connected with the camera.
– Quality: The quality of the connection
or image signal.
Under the live image (at the upper edge
of tablets), you will find the most
important functions:
3. Press the snapshot button to take
a snapshot of the live image.
27
.
.
1: The number
(tablets) that
of
are