NUK Eco Smart Control 300 Mode D'emploi page 31

2. Press and hold the field for the camera or
briefly tap the symbol to the far right of
the camera field.
A pop-up menu will appear.
3. Select "Change camera".
The camera menu will appear.
4. Tap the name of the camera.
The camera data will be read out. This
may take a few minutes.
When complete, the "Advanced" button
will appear.
5. Press the "Advanced" button.
The settings menu for the camera will
appear.
You can scroll through this menu to view
and call up all setting options.
6. To change settings, tap the field in
question and select the required setting
in the pop-up menu that appears.
7. Confirm the settings with "OK".
Password settings:
The factory
recommend changing this password to
prevent unauthorised access to the camera:
1. Click on "Change password".
2. Click on the field for the old password
"Old:" and enter the old password.
3. Click on the field "New:" for the new
password and enter the new password.
Note: The new password must be
between 1 and 15 characters long. You
may not use special characters; only
letters and numbers.
4. Click on the field "Confirmation" and
enter the new password again.
5. Click on "OK".
If there are other smartphones or tablets
connected with the camera when changing
this setting, this connection remains in place
until the app is closed on the respective
device.
Setting up a new connection with the
camera is only possible if the password for
this device has also been changed to the
new one.
Video settings:
Video quality:
compression are set here. The setting here
is generally "maximum". A lower setting
should only be selected if the data
connection is slower.
Video alignment: Here, you can choose
how the image is represented.
Surroundings mode: The camera can be
adapted to the lighting conditions:
29
setting is 888888.
Resolution and
We
data