NUK Eco Smart Control 300 Mode D'emploi page 32

– Inside (50 Hz): for artificial lighting
conditions with
network.
– Inside (60 Hz): for artificial lighting
conditions with
network.
– Outside: for natural lighting.
– Night: no light. The infrared function on
the camera is used here.
Noise detection:
Volume: Here, you can set the sensitivity of
the noise detection setting, i.e. at what level
the camera should
activated and send a message/notification
to the smartphone.
Trigger detection: Here, you can set the
length of time a noise must be audible
before it automatically activates the camera
and sends a message/notification to the
smartphone.
Notification: Here, you can set the type of
notification you wish to receive when the
camera is activated by a noise. Choose from
Silent, Ring Tone and Vibration.
Event detection:
The camera is not only activated by noises,
but also movements in the image.
Motion detection: Here, you can set the
sensitivity of the motion detection setting,
i.e. what kind
automatically activate the camera and send
a message/notification to the smartphone.
Notification: Here, you can set the type of
notification you wish to receive when the
camera is activated by a noise. Choose from
Silent, Ring Tone and Vibration.
a 50 Hz power
a 60 Hz power
be automatically
of movement
Receiving notifications:
Depending on the Android version, a
notification can be sent via the notification
server. This function can be activated or
deactivated in the user settings (latest
versions of Android). It is activated as
standard. This means that if the application
is closed and an alarm signal is created
because the
movement or a noise, a notification will be
sent. If you click on this notification, the
overview screen of the camera will be
shown and you can view the live image. If
the app is running in the background and a
notification is sent, click on it and the
window with the image will appear. This will
only happen if you have inserted an SD card
into the camera.
Recording settings:
The camera is equipped for the use of a
Micro SD card (see "7. Videos" on page 31),
with which it can record videos.
Mode: Here, you can decide whether you
wish to record a video always (Always),
never (Off) or only if a noise or movement is
detected (Alarm).
If the "Alarm" mode is set, any noise or
movement made will be recorded. At the
end of the recording, a notification will be
sent to the smartphone (tablet) and you can
view the
notifications:" on page 30).
will
30
camera has
video (see "Receiving
detected