NUK Eco Smart Control 300 Mode D'emploi page 28

Notes:
• Always connect
inserting the Powerline adapter into the
socket.
• Multiple socket outlets with overheating
cutout may not be used. These block the
signal.
• The camera and Powerline adapter must
be connected to related phases. This will
generally be the case when both plug
sockets are connected to the same
electricity meter.
5.3 Preparing the
smartphone/tablet
1. Connect your smartphone/tablet to your
wireless network. Further information on
connecting to a wireless network can be
found in the
smartphone/tablet.
2. If you do not have an app for reading QR
codes on your smartphone:
– Connect with Google Play.
– Download and install the app for
reading QR codes, e.g. "Barcode
Scanner".
3. Download the free app "NUK LiveCam"
from the Google PlayStore.
4. Start the NUK LiveCam App.
5. Press "Click to add camera".
the cables before
instructions for
6. Activate the camera. To do this, there are
three options:
Option 1:
– Press "Scan";
– Scan the QR code (UIC code) on the
reverse side of the camera.
Option 2 (only works if the smartphone is
connected to the same wireless network
as the Powerline adapter):
your
– Press "Search":
All the cameras that have been found
will appear in a pop-up window;
– Select a camera.
Option 3 (manual entry):
– Click on the empty field beside "UID";
– Manually enter the UID number of the
required camera. This can be found on
the reverse of the camera.
7. Click on
"Passport".
8. Enter the password. The factory setting is
"888888".
Note: For security reasons, you should
immediately change the password to
protect
settings:" on page 29).
9. Tap the empty field beside "Name".
10.Give the camera a name, e.g. "Nursery".
11.Complete the entry by pressing "OK".
The camera will now be connected.
When searching for the camera, the
following will appear in the display:
"Connecting...".
As soon as the connection is made, the
display will show "Connected".
26
the empty field
your data (see
beside
"Password