Transport Mode - Invacare Softform Active 2 Rx Manuel D'utilisation

Mattress will start to deflate. The deflation time is
20 seconds.
4. When CPR is complete reactivate the system following
section 4.2 Installing the system, page 8 .

5.4 Transport Mode

If it is necessary to move the bed or mattress simply:
1. Turn off power supply.
2. Disconnect control unit power lead (if necessary the air
hose).
3. When system is ready to reactivate following section 4.2
Installing the system, page 8 .
1630000-D
Air supply hose should be stored by attaching to the fastener
at foot of the mattress.
For Active Care mattress, the air hose is located inside the
mattress. To access the hose Unzip the mattress take out
hose and connect to the control unit, ensure that zip is
closed once connection is made.
Usage
11