Transport; Safety Information; Transport Mode - Invacare Softform Premier Active 2S Manuel D'utilisation

6 Transport

6.1 Safety information

IMPORTANT!
– Take care when handling mattresses to ensure
no damage to the cover. It is recommended
that two people lift/carry mattresses.
– Avoid contact with jewellery, nails, abrasive
surfaces etc.
– Do not drag mattresses.
– Avoid contact with wall, door frames, door
catches or locks etc.
– Do not transport in roll cages unless completely
protected from the sharp edges of the cage.
1. Refer to the storage and shipping conditions in section
10.4 Environmental Parameters, page 23.

6.2 Transport Mode

If it is necessary to move the bed or mattress simply:
1. Turn off power supply.
2. Disconnect control unit power lead (if necessary the
air hose).
3. When system is ready to reactivate following section 4.2
Installing the system, page 11.
Air supply hose should be stored by attaching to the fastener
at foot of the mattress.
For Active Care mattress, the air hose is located inside the
mattress. To access the hose Unzip the mattress take out
1627426-A
hose and connect to the pump, ensure that zip is closed
once connection is made.
Transport
15