Application Limits - Pentair STA-RITE FP/MULTI EVO-A Instructions De Service

EN
CHAPTER 2
APPLICATION
The FP/Multi EVO pump is a horizontal non­priming or self­priming multi­stage pump for pumping clean liquids without solid suspended
particles, fibers, or abrasive materials that may chemically or mechanically attack the pump, or liquids not compatible with the pump
construction material. The FP/Multi EVO pump must not be used for acids or corrosive substances
The pump can be used to pump water in:
• water distribution systems
FP/Multi EVO is an assembly made up of a pump plus automatic electronic control device, which:
• starts and stops the pump according
to opening and closing of utilities.
The start-up pressure is set at 1.5 bar (not modifiable).
DANGER
Never use the pump for flammable and/or explosive liquids.
DANGER
Improper use of the pump can lead to physical injury and/or material damage. Improper use of the product will render the
warranty null and void.
NOTE
The pump is suitable for use with drinking water for human consumption (Italian Ministerial Decree 174 and ACS). If the pump has been
assigned to uses other than water for human consumption, it may no longer subsequently be used for that purpose.

APPLICATION LIMITS

• Temperature of pumped liquid: from
+5°C to +50°C in compatibility with the
pump materials.
14
• irrigation systems
• stops the pump if no water supply is
detected, protecting it against dry
running conditions.
• Maximum ambient temperature:
+40°C;
• rain water collection systems
• reduces water hammer effect.
• maintenance free.
• Max. operating pressure: 8bar
(0.8MPa);