Application - Pentair STA-RITE MULTI EVO Instructions De Service

CHAPTER 2

APPLICATION

The Multi EVO pump is a multi­stage horizontal manual or self priming pump for pumping clean liquids with no solid suspended
particles, fibres or abrasive materials which could chemically or mechanically attack the pump, nor for liquids not compatible with the
pump's construction material. The Multi EVO pump must not be used for acids or corrosive substances
The pump can be used to pump water in:
• water distribution systems
DANGER
Never use the pump for flammable and/or explosive liquids.
DANGER
Improper use of the pump can lead to physical injury and/or material damage. Improper use of the product will render the
warranty null and void.
NOTE
The pump is suitable for use with drinking water for human consumption (Italian Ministerial Decree 174 and ACS). If the pump has been
assigned to uses other than water for human consumption, it may no longer subsequently be used for that purpose.
2.1 APPLICATION LIMITS
• Temperature of pumped liquid: from
+5°C to +50°C in compatibility with the
pump materials.
The data plate (Figure 5) lists the specifications:
POS. DESCRIPTION
Type of pump
1
2 Flow rate range
3 Head range
4 Minimum head
5 Number of phases
6 Voltage
7 Frequency
8 Motor rpm
9 Insulation class
10 Absorbed power of electric pump
11 Rated current
12 Condenser capacity
13 Protection rating
14 Maximum liquid temperature
15 Maximum ambient temperature
16 Maximum operating pressure
17 Weight
18 Serial number
19- Date of manufacture
• irrigation systems
• Maximum ambient temperature:
+40°C;
INSTRUCTION MANUAL
• rain water collection systems
• Max. operating pressure: 8bar (0.8MPa)
EN
13