Disassembly And Disposal - Pentair STA-RITE FP/MULTI EVO-A Instructions De Service

EN
CHAPTER 8

DISASSEMBLY AND DISPOSAL

DANGER - ELECTRIC SHOCK RISK
Before any intervention on the system, disconnect the electrical mains. Ensure that the electrical power supply cannot be
restored inadvertently.
• Disconnect the electronic device and
pump electrically from the system
according to safety standards.
DANGER
Note the position of the filler hole, which is also used as a bleed point. Ensure that the liquid on outlet cannot cause damage
or physical injury.
• Loosen the filler cap to reduce the
pressure of the liquid remaining
between the two valves
This product or any part of the latter must be disposed of in accordance with local standards using the public or private waste
collection authorities as required.
22
• Open the utility point closest to the
pump to discharge system pressure.
• Remove the drain cap from the pump
body to completely empty the pump
• Before disassembly, close the shutoff
valves on the delivery side, and if
present also close the shutoff valve on
the suction side.