Aqua Medic Top End Filter Mode D'emploi page 5

The Aqua Medic Top End Filter is a ready to use demineralization filter for removing silicate, nitrate and other
ions from osmosis water. Since silicate and nitrate are very small ions, they are held back to a lesser extent by
osmosis systems.
1. Included in shipment
- Filter housing
- Grid plate with pads
- Fleece
- Sealing ring for filter lid (already mounted)
- Wall bracket
- Double clip
- 2 fittings plus sealing (for osmosis units)
- Hose
2. Technical data
Height: app. 330 mm
Diameter: app. 71 mm
Volume: 500 ml
Connection thread: ¼"
Connections: ¼" fitting for 6 mm osmosis hose
3. Safety instructions
- When assembling, ensure that the seal is correctly positioned.
- Check the filter cartridge for leaks.
- Discard the first 2-3 liters of water produced with fresh resin.
- Keep it out of reach of children.
- Take care that nothing gets in the eyes.
Hazard warning (resin):
H318 Causes serious eye damage.
4. Connecting and starting
The Aqua Medic Top End Filter is connected to the pure water outlet of an osmosis system with the 6 mm
osmosis hose. It has always to be installed vertically. The flow must always be from bottom to the top so that no
air buffers or poorly perfused zones form.
Fig. 1: 1. Grid plate with pads (already mounted) 2. Fleece (already mounted) 3. Connection fittings
4. Hose 5. Double clip 6. Wall bracket
Operation Manual ENG
5